Xerox FaxCentre F12 User Manual Download Page 70

Page: 70 / 206

Page 5-10

Xerox FaxCentre F12 User Guide

Sending a Fax Manually

Document

guides

If necessary, pull
out this support.

Remove all staples and paper
clips before placing the
originals into the document
feeder.

Adjust the document guide on
the ADF to match the width of
the document

Insert the originals neatly into
the document feeder, face
down.

You can insert up to 50 sheets
at a time.
The first page should be on
the bottom with the headings
towards the left or back of the
machine.

Align the stack to the left and
against the rear edge of the
document feeder tray. Adjust
the guides to just touch the
edges of the originals.

Adjust the document settings
if necessary.

Summary of Contents for FaxCentre F12















































































































































































































Search results

Summary of Contents for FaxCentre F12

Reviews:

Related manuals for FaxCentre F12

Brands by name

Popular brands

Xerox FaxCentre F12, User Manual

Search results

Summary of Contents for FaxCentre F12

Reviews:

Related manuals for FaxCentre F12

Brands by name

Popular brands