Xerox DocuCentre SC2020, User Manual

Page: 96 / 322

Fax
Xerox
®
DocuCentre
®
SC2020
User Guide
93
The maximum supported document size is 297 x 431.8 mm (long).
Note: The document sizes with an asterisk can be automatically detected depending on the settings.
You can select one of the following alternative document sizes. For more information, refer to Original
Size Detected on page 176.
– B5 (default) or 16K
– 8.5 × 14" (default) or 8.5 × 13"
When document containing pages of different sizes is placed in the device, the device uses the
largest document size to scan the document.
The paper size for fax transmissions is different from the document sizes supporting automatic
detection. For more information, refer to
Original Size on page 105.
– Supported documents types (weights)
Documents with weights from 38-128 g/m
2
(50-128 g/m
2
for 2-Sided documents) can be placed in the
document feeder and scanned.
The document feeder accepts the following number of sheets.
To avoid paper jams, use the document glass for mixed size, folded, wrinkled, cut-and-pasted documents,
curled paper, or carbon-backed paper. If you can flatten the curled document, you can use the document.
Follow the steps below to place document in the document feeder.
You can place a single or multiple pages of a document.
1.
Remove any paper clips or staples from document before placing it in the document feeder.
2. Place the document in the center of the document feeder, with the side to be scanned (or the front
surface of a 2-Sided document) facing up.
Document Type ( g/m
2
)
Number of Sheets
Lightweight (38-80 g/m
2
)
110 sheets
Heavyweight (81-128 g/m
2
)
75 sheets