background image

Xerox

® 

DocuCentre

® 

SC2020

User Guide

152

9

Tools

Each function is set to the factory default (initial) settings, but you can customize these settings to match 
your operating environment. You can change the settings in [Tools].

Note:

Some settings cannot be displayed on some models. An optional component is required. For 

more information, contact our Customer Support Center.

This chapter describes the functions you can make settings changes for.

Understanding the Device Menus

When the device is connected to a network and available to a number of users, the access to the [Admin 
Settings] can be limited. This prevents other users from using the control panel to inadvertently change a 
user default that has been set by the administrator. 

However, you can use your print driver to override user defaults and select settings for individual print jobs.

Report/List

Use the [Report/List] menu to print various types of reports and lists.

Note:

The reports and lists with an asterisk can be printed only when the Fax Kit (optional) is installed.

System Settings

Purpose: To print a list of the current user default values, the installed options, the amount of installed print 
memory, and the status of device supplies.

Panel Settings

Purpose: To print a detailed list of all the settings on the control panel menus.

PCL Fonts List

Purpose: To print a sample of the available PCL fonts.

Summary of Contents for DocuCentre SC2020



































































































































































































































































































































Reviews: