Xerox DocuCentre SC2020 User Manual Download

Page: 166 / 322

Tools

Xerox

DocuCentre

SC2020

User Guide

163

Values:

Note:

[HTTP-SSL/TLS] is available only when a certificate is created using CentreWare Internet

Services. For information on creating a certificate, refer to the online Help of CentreWare Internet

LPD

Disable

Disables the Line Printer Daemon (LPD) port.

Enable

Enables the LPD port.

Port9100

Disable

Disables the Port9100 port.

Enable

Enables the Port9100 port.

FTP

Disable

Disables FTP port.

Enable

Enables FTP port.

IPP

Disable

Disables IPP port.

Enable

Enables IPP port.

WSD Print

Disable

Disables WSD print.

Enable

Enables WSD print.

WSD Scan

Disable

Disables WSD scan.

Enable

Enables WSD scan.

SNMP UDP

Disable

Disables the Simple Network Management Protocol
(SNMP) UDP port.

Enable

Enables the SNMP UDP port.

StatusMessenger

Disable

Disables the Status Messenger feature.

Enable

Enables the Status Messenger feature.

InternetServices

Disable

Disables an access to CentreWare Internet Services
embedded in the device.

Enable

Enables an access to CentreWare Internet Services
embedded in the device.

Bonjour (mDNS)

Disable

Disables Bonjour (mDNS).

Enable

Enables Bonjour (mDNS).

Telnet

Disable

Disables Telnet.

Enable

Enables Telnet.

Update Address
Book

Disable

Disables Update Address Book.

Enable

Enables Update Address Book.

HTTP-SSL/TLS

Disable

Disables HTTP-SSL/TLS.

Enable

Enables HTTP-SSL/TLS.

Summary of Contents for DocuCentre SC2020



































































































































































































































































































































Search results

Summary of Contents for DocuCentre SC2020

Reviews:

Related manuals for DocuCentre SC2020

Brands by name

Popular brands

Xerox DocuCentre SC2020, User Manual

Search results

Summary of Contents for DocuCentre SC2020

Reviews:

Related manuals for DocuCentre SC2020

Brands by name

Popular brands