Security
ColorQube 9301/9302/9303 Multifunction Printer
81
System Administrator Guide
IPsec
Internet Protocol Security (IPsec) is a group of protocols used to secure Internet Protocol (IP)
communications by authenticating and encrypting each IP data packet. It allows you to control IP
communication by creating protocol groups, policies, and actions.
You can control IP communication on the printer for the following:
DHCP v4/v6 (TCP and UDP)
DNS (TCP and UDP)
FTP (TCP)
HTTP (Scan Out, TCP port 80)
HTTPS (Scan Out, TCP port 443)
HTTPS (Web Server, TCP port 443)
ICMP v4/v6
IPP (TCP port 631)
LPR Print (TCP port 515)
Port 9100 Print (TCP port 9100)
SMTP (TCP/UDP port 25)
SNMP (TCP/UDP port 161)
SNMP Traps (TCP/UDP port 162)
WS-Discovery (UDP port 3702)
Up to 10 additional services
Enabling IPsec
Before you begin:
Ensure that Secure HTTP (SSL) is enabled.
1.
In CentreWare Internet Services, click
Properties
>
Security
.
2.
Click
IPsec
.
3.
Under Enablement, select
Enabled
.
4.
Click
Apply
to save the new settings or
Undo
to retain the previous settings.
Managing Actions
Use actions to more specifically manage how IPsec controls dependent protocols.
Creating a New Action
1.
Click
Actions
at the top of the IPsec page.
2.
Click
Add New Action
.
3.
On the Step 1 of 2 page, under IP Action Details, type in the Name. This field is required.
4.
In the Description field, type a description for the action, if desired.
5.
Under Keying Method, select
Manual Keying
or
Internet Key Exchange (IKE)
.
Note:
Select Manual Keying if client devices are not configured for or do not support IKE.
6.
If you selected IKE, under Pre-shared Key Passphrase, type the passphrase, then click
Next
.
