Network Configuration
ColorQube 9301/9302/9303 Multifunction Printer
37
System Administrator Guide
Microsoft Networking
When running WINS, the printer registers its IP address and NetBIOS Host Name with a WINS server.
WINS allows the printer to communicate using host name only. Using Microsoft Networking removes
significant overhead for systems administrators.
Configuring Microsoft Networking
1.
In CentreWare Internet Services, click
Properties
>
Connectivity
>
Protocols
.
2.
Click
Microsoft Networking
.
3.
Under Protocol, select
Enabled
to enable the protocol.
4.
Type the name of the workgroup in the Workgroup field.
5.
Type the host name used to provide shared access and authenticate interprocess communication in
the SMB Host Name field.
6.
If desired, type a descriptive comment in the SMB Host Name Comment field.
7.
Type the name of the share in the Share Name field.
8.
If desired, type a descriptive comment in the Share Name Comment field.
9.
Type the maximum number of connections allowed, between
10–30
, in Maximum Connections.
10.
Type the desired number of seconds, between
1–32767
, until the connection times out.
Configuring WINS
1.
Under Server Information, select
Enabled
to enable the protocol.
2.
Type the IP Address for your primary server.
3.
If desired, type an IP Address for a secondary server.
Note:
If DHCP is configured, WINS IP Addresses are overridden.
4.
Click
Apply
to save the new settings or
Undo
to retain the previous settings.
