Administrator Tools
ColorQube 9301/9302/9303 Multifunction Printer 171
System Administrator Guide
Setting the Date and Time
Setting the Date and Time in CentreWare Internet Services
1.
In CentreWare Internet Services, click
Properties
>
General Setup
.
2.
Click
Date and Time
.
3.
Under Date and Time Setup, select:
Automatic using NTP
to allow the NTP service to set the time automatically.
Manual (NTP Disabled)
to set the date and time manually.
4.
If you are using an NTP server, select the address type. Options are
IPv4 Address
or
Host Name
.
Type the appropriately formatted address, alternate address, and port numbers. The default port
number is 123.
Note:
Changes to these settings cause the printer to restart.
5.
Select the date and time format, and type the date and time in the appropriate fields. Select the
Display 24 hour clock
check box to show the time in 24 hour format.
6.
Under Time Zone, select your time zone from the drop-down menu.
7.
Click
Apply
.
Setting the Date and Time at the Control Panel
1.
At the printer control panel, press the
Machine Status
button, then touch the
Tools
tab.
2.
Touch
Device Settings
>
General
>
Date & Time
.
3.
To set the time zone, touch
Time Zone
and touch the arrows to adjust the time zone.
4.
To set the date, touch
Date
, select a format and set the date.
5.
To set the time, touch
Time
and set the time. Select
Display 24 hour clock
to use 24 hour format.
6.
Touch
Save
.
