SmartPad LCD
™
Page:
21
© 2008 Xantech Corporation
IR In Zone
(Figure 3 – Item 17)
IR In Zone allows connection of emitters directly to the SPLCD to control components in the same general area
as the SPLCD.
1.
Cut the
3.5mm mini plug
off the end of a Xantech
IR emitter
.
2.
Connect the
IR OUT Terminal
on the
SPLCD Rear Panel
to the
white stripe wire
on the emitter wire and
connect the
GND Terminal
to the
black wire
on the emitter cable, using the included 2-conductor screw-
type
Removable Connector
.
3.
To control
multiple components
in the same area, connect these same terminals to an
Amplified
Connecting Block
(Xantech Model 791-44) using 18-20AWG 2-conductor cable.
NOTE: IR In Zone
is a
MRC88
feature and must be enabled when programming the
MRC88
in
Universal
Dragon
.
Figure 11 – IR In Zone Connections