![background image](http://html1.mh-extra.com/html/xantech/splcd64g/splcd64g_installation-and-programming-manual_3181431072.webp)
Page: 72
SmartPad LCD
™
© 2008 Xantech Corporation
Figure 53 – Options Window/MRC88 Emulation
Programming SPLCD for MRC88 Functionality
Once the SPLCD has been configured for MRC88 Keypad Emulation, you can point any GTL on the SPLCD to
a specific macro within the MRC88 Controller.
1.
In the
SPLCD System Window
, click the
Macros Tab
to lock in the current
GTL Button
layout.
2.
In the
SPLCD System Window
, select a
Source Button
.
3.
In the
Palette Editor Window,
click the
Internal Commands Tab
.
4.
In the
Internal Command Window
, select
MRC88 Button Emulation
from the
pull-down
.
NOTE:
The
MRC88 Internal Commands
are pointers to
button locations
within the
MRC88 Controller
.
The
SPLCD
can now initiate whatever
Macros
are programmed within the
MRC88
under these buttons.
5.
Scroll through the list and associate the
SPLCD Button
to the appropriate
MRC88 Internal Command
to
initiate the Macro programmed under that specific button within the MRC88 Controller. (i.e. In the
SPLCD
System Window
, click the
Source 1 Button (DVD)
and then select
Src 1
from the
MRC88 Button
Emulation List
as shown in the example below.