X-Rite VeriColor Spectro, Setup & Operator Manual

Page: 58 / 68

V E R I C O L O R ® S P E C T R O
58
General Maintenance
Repair Information
The VeriColor Spectro is covered by a one-year limited warranty and should be referred to
the factory or an authorized service center for repairs within the warranty period. Attempts
to make repairs within this time frame may void the warranty.
X-Rite provides a factory repair service to their customers. Because of the complexity of the
circuitry, all repairs should be referred to the factory or an authorized service center (call: 1-
888-826-3042 or 1-616-803-2100).
X-Rite will repair any VeriColor Spectro past warranty. Shipping cost to the factory or
authorized service center shall be paid by the customer.
Cleaning the Spectro Instrument Lenses
Normally, use low-pressure air to blow away any dust or debris on the lenses (or use a soft
lens brush).
To remove dirt or finger prints, clean with a soft cotton cloth rubbing in a circular motion.
Use of a coarse cloth or unnecessary rubbing may scratch the lens surface and eventually
cause permanent damage.
For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning
fluid or isopropyl alcohol may be used. Always apply the fluid to the cleaning cloth – never
directly on the lens.
Cleaning the Calibration Tool
Caution should be used not to touch the white reference in the bottom of the calibration tool.
ONLY use clean, dry low-pressure air to remove any contaminates from the white reference
in the calibration tool.
Store the calibration tool in the bag provided when not in use.