X-Rite VeriColor Spectro, Setup & Operator Manual

Page: 49 / 68

V E R I C O L O R ® S P E C T R O
49
5. Click End of Series button at the bottom of the Monitor dialog to end the interval
measurement sequence.
6. Click the Store button (if activated) to save the measurement data as a .txt, .csv, or .mif
file.
Viewing Sample Data
Trial Data
The table on the right of the Monitor dialog displays the data for the current measurement. A
color patch that simulates the trial color is displayed to the right of sample data. You can
switch between absolute and difference data by clicking between the
abs and dif buttons.
Trend Graph and Controls
The trend graph displays the pass/warning/fail status of the last 25 sample measurements.
Graph bars represents individual measurements or averaged measurements if sliding
averaging is used. Upper and lower “Action” and “Fail” limit lines display as yellow and red
respectively only on applicable tolerance options correlating to the active standard. You can
also enable/disable controls line in the trend by using the control lines button on the left. See
next page for details.
The graph controls are located on the left side of the screen.
(zoom in) – The zoom in button increasing the trend graph viewing scale.