X-Rite VeriColor Spectro, Setup & Operator Manual

Page: 21 / 68

V E R I C O L O R ® S P E C T R O
21
5. You can password protect the Admin menu, Setup menu, and Project mode from
unauthorized access by checking the desired
Password for option and entering a
password in the New password field. The password must be between 2 and 7 characters
to be acceptable. You will then be asked to enter this password before you can access the
mode selected.
6. Click the OK button to save your setting and exit Admin; or select the Verify, Lookup,
Compare, or Monitor page to continue with option settings.
Verify Screen Page
The verify screen is used to choose how the measurement will be triggered, measurement
interval time (for timed interval), and the Tolerance dE value used for Verify mode.
1. Select Manual , Timed interval , or External Trigger as the trigger mode. This
determines the measurement method that is used in Verify mode. The default mode is
Timed interval. Manual selection requires a Measure button click for each measurement.
Timed interval allows automatic interval measurements to take place. External trigging
requires an external device (PLC) to activate a measurement.
2. Click in the Tolerance dE field and enter desired tolerance value. This determines the dE
value used in the Verify mode.
3. Click the OK button to save your setting and exit Admin; or select the General, Lookup,
Compare, or Monitor page to continue with option settings.