X-Rite VeriColor Spectro, Setup & Operator Manual

Page: 44 / 68

V E R I C O L O R ® S P E C T R O
44
Monitor Mode
The Monitor mode is the “main” mode of the application. The Monitor mode is used to view
sample measurement performance once the color standards are set up.
The Monitor dialog is accessed by clicking the
Monitor button at the bottom of the
application.
The first step is to select a target (standard) or measure a target (standard). If Auto Target
was setup in the Admin/Monitor page, you would select the project where the standards are
located. If auto targeting is not used, you would select a specific target.
Selecting a Single Standard (no auto target)
1. Click the Target from file button to open a dialog where a stored standard is selected as
the target color.
2. Click the left arrow button (<) located between the Palette and Project lists to active the
Palette list.