X-Rite VeriColor Spectro, Setup & Operator Manual

Page: 50 / 68

V E R I C O L O R ® S P E C T R O
50
(zoom out) – The zoom out button decreasing the trend graph viewing scale.
(grid ) – The grid button is used to turn the grid pattern off and on in the trend graph.
(upper/lower control lines) - The upper/lower control lines button is used to turn
the control lines off and on for the trend graph. The “red” lines are the fail limits and
the “yellow” lines are the warning or action limits.
(date/number stamp) – The date/number stamp button toggles between date-time
and number for each measurement. When the button is down, the date and time
display. When the button is up, the measurement number appears.
Traffic Light
The traffic light on the right of the screen provides pass/warning/fail status of sample
measurements. The green light indicates the measurement is within tolerance and is a pass.
The yellow light indicates that the measurement is trending toward a fail condition, but is still
within tolerance. And the red light indicates the measurement is outside of tolerance and is
in a fail condition. Any pre-set attribute that is out of tolerance will cause a fail condition.
Pass (green) Warning (yellow) Fail (red)
The traffic light reacts differently based on the “sliding averaging” setting and the “Only Last
Record for PASS/FAIL” option setting in the Admin/Monitor page. Refer below for an
explanation of the setting conditions.
No Averaging (sliding average = 1) and Only Last Record for PASS/FAIL enabled (checked)
• Green light = current measurement is a pass.
• Yellow light = current measurement is ok but trending toward fail.
• Red light = current measurement is a fail.
No Averaging (sliding average = 1) and Only Last Record for PASS/FAIL disabled (unchecked)
• Green light = all measurements displaying within the active trend graph window are
passing.