X-Rite 500 Series, Operator'S Manual

Page: 97 / 124

I N S T R U M E N T F U N C T I O N S
5-43
To set option:
1.
With the Mode editor displayed, press the Tab keys
$@
to move the highlight to desired setting.
2.
Press the Enter key
#
to select highlighted setting.
The setting is now saved in the instrument.
NOTE: The mode option selected will revert back to its original
setting if the Enter key
#
is not used to exit the editor.
Measuring Paper
When you select Hue/Grayness minus paper as the
measurement mode, you must provide a reading of the
paper before taking measurements. The instrument takes
the density value of the paper and automatically subtracts
it from subsequent density measurements. The paper
measurement values are applied to all functions that
support minus paper.
To measure paper:
1.
If not selected, press the Tab Up key
$
or Tab Down
key
@
to highlight
Paper
. <
Measure Paper
>
appears in the user dialog. The paper values
displayed are the current values set in the instrument.
2.
Center the instrument target window over a sample of
the paper, and lower the instrument to take a reading.
The paper values are updated and the display
highlight advances to
Hue/Gray
.
NOTE: If HiFi status is used, press the Enter key
#
when
Paper
is
highlighted to view the RGBO values.
H U E / G R A Y
-
R E F
O p t i o n s
P a p e r
H u e / G r a y
R e f e r e n c
V 0.00
C 0.00
M 0.00
Y 0.00
<
M e a s u r e P a p e r
>
T