X-Rite 500 Series, Operator'S Manual

Page: 107 / 124

I N S T R U M E N T F U N C T I O N S
5-53
To set up a reference:
1.
If not selected, press the Tab Up key
$
or Tab Down
key
@
to highlight
Reference
.
2.
Press the Enter key
#
to access Compare References
menu. <
Measure Ref
> appears in the user dialog.
3.
Use the Tab keys
$@
to select an empty reference location
(1-24).
No Measurement
appears on the right side of the
screen when the reference location is empty.
At this point, you can either measure in the reference or
select a reference from the Match function database.
4.
To Measure in a Reference:
Center the instrument target window over the reference
and lower the instrument to take a reading.
To Select a Reference from the Match Database:
Press the Enter key
#
to access the reference database of
the active group. Use the Tab keys
$@
to select the desired
reference and press the Escape key
!
.
NOTE: To quickly locate a specific reference where many exist, hold
down either Tab key
$@
to access the
Find Ref Name
screen. From
here you can enter the name in the field and select Save & Exit to
locate the reference.
5.
The highlight moves to the data side of the display.
Press the Enter key
#
to access Ref Options editor.
6.
Use the Tab keys
$@
to move the highlight to desired
ref option.
7.
Press the Enter key
#
to select highlighted setting.
NOTE: The measured reference can be disabled and then re-enabled
at a later time when desired. Simply move the highlight to
Enable
and press the Enter key
#
to change to
Disable
. Pressing the Enter
key # again re-enables the reference.
8.
An illuminant/observer combination can be set for
colorimetric options selected. Press the Tab Up key
$
R e f e r e n c e s
R e f : E n g l i s h
R e f
R e f
R e f
R e f O p t i o n s
Δ
E
Δ
V C M Y
Δ
C M Y
↓
Δ
E,
Δ
VCMY
(
Δ
VCMYRGBO in HIFI),
Δ
CMY
,
a n d s o o n .