X-Rite 500 Series, Operator'S Manual

Page: 40 / 124

C H A P T E R F O U R
4-10
•
Standard - Normal measurement functionally occurs in
auto color mode. This is the instrument’s factory setting.
To select a gray set scale:
1.
Use the Tab keys
$@
to highlight
Gray Set
.
2.
Press the Enter key
#
to access the
Gray Set
editor.
3.
Use the Tab keys
$@
to highlight the desired setting,
10 Scale
,
20 Scale
, or
Standard
.
4.
Press the Enter key
#
to save your setting and return
to the Density Options menu.
Calibration Options
The Calibration configuration allows you to determine the
following settings:
•
Full Calibration – Updates the white and black
calibration points in your instrument. Refer to Section
Three for the procedure.
•
Enter Reflectances – Manually enter reflectance values
for white calibration.
•
Cal Alert – Enable a calibration alert and set how often
the instrument will alert you to perform a calibration.
To open the Calibration Options menu:
1.
Use the Tab keys
$@
to highlight
Cal Options
.
C O N F I G U R A T I O N
L a n g u a g e : E n g l i s h
A c t i v e F u n c t i o n s . . .
D e n s i t y O p t : T
C o l o r O p t i o n : C I E
C a l O p t i o n s : 2 4 h r s
↓
D e n s i t y O p t i o n s
S t a t u s : T
P r e c i s i o n : N o r m a l
G r a y S e t : S t a n d a r d
<
Edit Options
>