X-Rite 500 Series, Operator'S Manual

Page: 51 / 124

S E T T I N G I N S T R U M E N T C O N F I G U R A T I O N
4-21
appropriate type (paper, solid, etc). When set to Off, the
instrument simply sequences through the measurement steps
with no attempt at identifying the measurement type.
To set the patch smart status:
1.
Use the Tab keys
$@
to highlight
Patch Smarts
2.
Press the Enter
#
key to access the
Patch Smarts
editor.
3.
Use the Tab keys
$@
to highlight the desired setting,
On
or
Off
.
4.
Press Enter key
#
to save the setting and return to
the Configuration menu.
User Configuration
The User Configuration allows you to quickly configure
dot and density options with minimal set up time.
•
US – When this option is selected the following
density and dot options are set: Status T, Density
Absolute, Dot Ref 1 = 25%, Dot Ref 2 = 50%, Dot
Ref 3 = 75%, and News Off.
•
Euro – When this option is selected, the following
density and dot options are set: Status E, Density -
Paper, Dot Ref 1 = 40%, Dot Ref 2 = Off, Dot Ref 3 =
80%, and News Off.
•
News Balance – When the instrument is set to this mode,
the CMY components of the 3 color overprint patch
measurement is displayed. The dominant density value is
displayed on top. The difference between the dominant
density and the second most dominant density is
displayed next, and the difference between the dominant
density component and the least dominant density
component is displayed last. The differences are displayed
C O N F I G U R A T I O N
↑
S p e e d R e a d : 0 s e c
D i s p l a y : L e f t
B e e p e r : O n
P a t c h S m a r t s : O n
U s e r C o n f i g : U S
On, Off