wtw DIQ/S 282, Operating Manual, Page: 77 / 186

DIQ/S 28X Operation
77
ba77168d02 03/2017
4.9 USB interface
The USB interface on the DIQ/S 28X can be used for the following actions:
 Saving data of the IQ S
ENSOR
N
ET
to a USB memory device
(see section 4.9.1)
 Transmitting configuration data to the Universal Transmitter
(see section 4.9.2)
 Carrying out a software update
(see section 4.11)
 Accessing the system with the Electronic Key
(see section 4.3)
4.9.1 Saving IQ S
ENSOR
N
ET
data to a USB memory device
You can save the following data types:
 Configuration data (see section 4.9.2)
 Measurement data (see section 4.9.2)
 Log book
 Calibration history
The configuration data can be transferred from the USB memory device back to
the IQ S
ENSOR
N
ET
. Thus, you can very easily create systems that are config-
ured identically.
Data backup
1 Switch to the measured value display with <M> .
2 Open the Einstellungen/Settings menu with <S> .
3 Use <  > and <OK> to open the Data transfer to USB memory
menu.
4 Select the data to be saved with <  > .
 Save configuration
 Measured data storage
 Log book
 Calibration history
and confirm with <OK> .
5 The data are prepared for the transfer.