wtw DIQ/S 282, Operating Manual, Page: 30 / 186

Installation DIQ/S 28X
30
ba77168d02 03/2017
Mounting the sun
shield on a
mounting stand
Fig. 3-5 Mounting the SSH/IQ sun shield on a mounting stand
Premounting the
ISO blind nuts
Fig. 3-6 Mounting the sun shield: Premounting the ISO blind nuts
1 Screw the sun shield (pos. 1 in Fig. 3-5) with the four hexsocket head
screws (pos. 2), the washers (pos. 3) and the clamps (pos. 4) at the
required height on the mounting stand from the back.
2
3
4
1
2 Remove the two countersunk screws (pos. 5 in Fig. 3-6) and swing open
the lid.
3 Insert the cheese-head screws (pos. 6 in Fig. 3-6) with the plastic wash-
ers in the drilled mounting holes and loosely screw in the ISO blind nuts
(pos. 7).
7
6
5