wtw DIQ/S 282 Operating Manual Download Page 179

Page: 179 / 186

DIQ/S 28X

Technical data

179

ba77168d02

03/2017

NOTE

The valve may only be operated with the auxiliary voltage of the DIQ/S 28X Uni-
versal Transmitter.

Compressed air

10.5 Space required by mounted components

Wall mounting and

top hat rail

mounting

Fig. 10-7 Space required for wall and top hat rail mounting: (dimensions in mm)

Panel mounting

(PMS/IQ)

Fig. 10-8 Space required for panel mounting (PMS/IQ) (dimensions in mm)

Required air quality

Dry, free of dust and oil

Operating pressure

Max. 7x10

Pa (7 bar) absolute

Connections on the DIQ/CHV

6 mm hose nozzles

Wall mounting
or
top hat rail mounting

Space required

for screwdriver

340

195

290

Information on the space required with the PMS/IQ-X mounting set:
see PMS/IQ-X operating manual.

Panel mounting

Space required

for screwdriver

105

48 5

185

215

Summary of Contents for DIQ/S 282


























































































































































































Search results

Summary of Contents for DIQ/S 282

Reviews:

wtw DIQ/S 282, Operating Manual, Page: 179 / 186

Search results

Summary of Contents for DIQ/S 282

Reviews: