wtw DIQ/S 282, Operating Manual, Page: 147 / 186

DIQ/S 28X Outputs
147
ba77168d02 03/2017
7.6.9 Manual control
Function The Manual control function can be used to test the operativeness of an instru-
ment that is connected to the relay. To do so, close or open the relay manually
and, while doing so, check the behavior of the connected instrument.
7.6.10 Alarm contact
Function The Alarm contact function triggers a relay action (opening or closing) if a
defined alarm event takes place. The Alarm contact function is only available for
relays that are not linked with a sensor. If necessary, an existing link must be
erased.
7.7 Setting the current outputs (variant -CR3, CR6)
Setting Selection/Values Explanation
Relay function
Manual control The selected relay action is car-
ried out with
Save and quit .
Action
Open
Close Relay action (see section 7.6.1)
The settings for other functions in the Relay function menu as, for
example, Frequency controller and Pulse-width output are retained
while the Manual control is carried out.
Setting Selection/Values Explanation
Relay function
Alarm contact The selected relay action is car-
ried out with
Save and quit .
Action
Open
Close Relay action (see section 7.6.1)
1 Call up the measured value display with <M> .
2 Open the Settings menu with <S> .
3 Using <

> , highlight the menu item, Settings of outputs and
links , and confirm with <OK> . The Settings of outputs and links display
appears.
4 Using <  > , highlight the Feature column. Confirm with <OK> .