wtw DIQ/S 282, Operating Manual, Page: 89 / 186

DIQ/S 28X Settings/setup
89
ba77168d02 03/2017
An inactive dataset can be reactivated by assigning it, e.g. to an IQ sensor of
the same type (see section 9.3.2). All settings are retained. If these data are no
longer required, they can be erased. All the data and settings and the link with
an output belonging to this IQ sensor are erased by this action.
Fig. 5-6 Edit list of sensors -> Erase inactive sensor
5.5 Settings for sensors
Sensor settings include the measured parameter, measuring range and, if
necessary, compensations.
Enhanced sensor
functions
For certain sensors, special representation types and settings are available in
the menu,
Extended sensor functions . An example for an enhanced sensor
function is the editing of measured values as a graphic representation with
cursor and zoom function (e.g. echo profile for the sludge level sensor
IFL 700 IQ).
1 Open the Einstellungen/Settings menu with <S> .
2 Using <  > and <OK> , select and confirm the menu item, System
settings -> Edit list of sensors .
The Edit list of sensors display opens.
3 Using <

> , highlight the Model column. Confirm with <OK> .
4 Press <  > to highlight a Model and confirm with <OK> .
5 Using <

> , select Erase inactive sensor and confirm with <OK> .
The dialog window for the security prompt appears.
6 Using <  > , select Erase inactive sensor and confirm with <OK> .
The inactive sensor is erased.