wtw DIQ/S 282, Operating Manual, Page: 35 / 186

DIQ/S 28X Installation
35
ba77168d02 03/2017
Mounting the DIQ/
S 28X in a switch
panel
Fig. 3-11 Mounting the DIQ/S 28X in Fig. 3-11
1 Angle bracket
2 Bolts
3 Bolts
4 Impact protection plate
5 Bolts to fix the impact protection plate
1 Insert the universal transmitter in the panel aperture from the front.
2 Slightly unscrew the bolts (pos. 2 and 3) of the two angle brackets (pos.
1 in Fig. 3-11), but do not remove them.
3 Push in the two angle brackets - as shown in Fig. 3-11 - into the lateral
guides of the universal transmitter up to the stop.
4 Tighten the bolts (pos. 2).
5 Screw in the bolts (pos. 3) until the bolts rest snugly against the panel.
Bei S
tape
lm
ontage
Au
fklebe
r
en
tfern
en
un
d K
onta
ktträger
montiere
n
For stack m
ounting re
move la
bel
and install con
tact ca
rrier
5
3
2
2
3
1
4