DIQ/S 28X
Operation
71
ba77168d02
03/2017
With the
Acknowledge all messages
function you can acknowledge all
messages at the same time (see section 4.5.4).
If a message text is not available because, e.g. a module is not connected with
the system, you can look up the detailed text of the message as follows:
Messages of the system are given in this operating manual (see
section 12.1).
Messages of a module are given in the respective component operating man-
ual of the module.
4.5.4
Acknowledge all messages
5
Acknowledge the message with
<OK>
. A checkmark appears in the log
book entry.
6
Exit the message text with
<ESC>
.
Acknowledgment of a new message text in the log book marks the
message as read. When all errors or information messages are
acknowledged, the symbols no longer flash.
Message texts are stored in the modules that caused them. There-
fore, further information on a log book entry for an IQ sensor such
as, e.g. calibration messages, instructions and help texts are only
accessible in the case of connected components that are ready for
operation.
1
Switch to the measured value display with
<M>
.
2
Open the
Einstellungen/Settings
menu with
<S>
.
3
Using
<
>
, select the menu item,
Service
and confirm with
<OK>
.
4
Using
<
>
, select the menu item,
Acknowledge all messages
and confirm with
<OK>
. A security prompt opens.
5
Using
<
>
, select
Acknowledge
and confirm with
<OK>
. All mes-
sages are acknowledged. Error symbol and info symbol do no longer
flash.
Summary of Contents for DIQ/S 282
Page 8: ...DIQ S 28X 8 ba77168d02 03 2017 ...
Page 185: ......