wtw DIQ/S 282, Operating Manual, Page: 78 / 186

Operation DIQ/S 28X
78
ba77168d02 03/2017
4.9.2 Restore system configuration
The restoration of a configuration back to the universal transmitter is carried out
manually from the USB memory. For this it is useful to save the configuration to
a USB memory device manually and regularly.
Manual restoration To transfer configuration data to the Universal Transmitter, proceed as follows:
4.10 Info on software versions
The system informs you of the current versions of the software of the individual
IQ S
ENSOR
N
ET
components.
You can cancel the data saving process by highlighting and confirm-
ing the Cancel menu item with
<  > and <OK> . In this case
the data will not be stored to the USB memory device.
6 Press <

> to highlight the Save menu item and confirm with
<OK> .
The selected data will be stored to the USB memory device.
1 Open the Settings menu with <S> .
2 Press <  > to select the menu item Data transfer to USB memory
and press <OK> .
3 Press <  > to select the menu item Retransfer configuration and
press <OK> . The process is started.
4 Wait until the restore is terminated.
5 Confirm the concluding message with <OK> .
1 Call up the measured value display with <M> .
2 Open the Einstellungen/Settings menu with <S> .
3 Using <

> , highlight the menu item, Service , and confirm with
<OK> . The Service dialog window opens.
4 Using <

> , highlight the menu item, List of all components , and
confirm with <OK> .
The List of all components dialog box opens.