WIM-PD-002_B
Page
12
of
38
CAUTION
4.2.12
Strike the output end of clutch shaft with a soft face hammer (brass) to relieve bearing
preloading caused by installation, see sketch below (appearance in some models vary).
CAUTION
4.2.13
Torsional vibrations must be managed with proper coupling selection, regardless of its
position in the drivetrain. When not properly dealt with, torsional vibrations can cause
major damage to the machine. Before installing a PPD, contact the equipment
manufacture or WPT to verify the proper analysis has been completed.
CAUTION
NOTE: Consult PTO manual when installing PTO to pump drive.
Summary of Contents for WPD-02
