WIM-PD-002_B
Page
28
of
38
7.3
Approved Oil with Operating Speeds
Castrol
Shell
Alpha MW 220 SP 220
Shell Omala Oil 220
Alpha MW 100 SP 100
Shell Omala Oil 100
Alphasyn T 220
Shell Omala Oil HD 220
Alphasyn T 100
Shell Tivela Oil WB 220
Alphasyn PG 220
Shell Tivela Oil WA 150
Mobil
BP
Mobilgear 630, Mobilgear XMP 220
Energol GR-XP 220
Mobilgear 627, Mobilgear XMP 100
Energol GR-XP 100
Mobilgear SHC XMP 220
Enersyn HTX 220
Mobilgear SHC XMP 100
Enersyn SP-XP 220
Mobil Glygoyle 30, Mobil Glygoyle 11
7.4
Oil Temperature Specification
Oil temperature should be monitored by checking two (2) or three (3) places on the unit. Reading should
be measured between 8 - 12 inches (20-30 cm) from unit. Oil temperature should not exceed 180°F (82°C)
and ambient temperature should be limited to 120°F (50°C) max.
Summary of Contents for WPD-02
