WIM-PD-002_B
Page
14
of
38
4.3.9
Attached new drive ring to the engine flywheel using new hardware.
•
Refer to torque chart in the back of the instructions or torque to engine manufactures
recommended setting.
4.3.10
Attach the new coupling to In-put splined hub using the twelve (12) provided hex head cap
screws (item 4).
•
Apply 242 Loctite or equal to bolts and tighten evenly in 3 stages securing the hub and
coupling.
Grade of bolt
Stage 1
lbf•ft [Nm]
Stage 2
lbf•ft [Nm]
Stage 3
lbf•ft [Nm]
Grade 8.8
22 [30]
44 [60]
55 [75]
Grade 12.9
44 [60]
77 [105]
89 [120]
4.3.11
Install hardware PPD onto engine ensuring coupling aligns with drive ring.
•
Refer to torque chart at the end of the instructions or torque to engine
manufactures recommendation.
4.3.12
Reinstall peripheral items such as belts, guards, etc. per equipment manual.
Summary of Contents for WPD-02
