Wohler AMP1-16V-MD, User Manual

Page: 91 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h no lo g i e s , I n c . A l l r i g h t s r e s e r ved .
83
C ha p t e r 6 Menu List
M e t e r C o n f ig u ra t io n M en u
• Ballistics : Rotating the Balance knob after pressing this button
adjusts the float. Pressing the Balance knob and then the rotating
the Balance knob adjusts the bar. Ballistic timings are valid only at
48 kHz.
• Set Default : Press this button and then confirm by pressing the
Balance knob.
• Reference : Rotating the Balance knob after pressing this button
adjusts the display reference level. The reference level is adjustable
in one dB increments.
• Upper Segment Color : Rotating the Balance knob after pressing
this button cycles the upper color of the displayed sample level
meter color through a wide variety of colors. Pressing the
Balance
knob and then the rotating it sets the division between the upper
and middle segments. Color boundaries are adjustable in 1 dB
increments, and have the same range as the top and bottom limits of
the meter.
• Middle Segment Color : Rotating the Balance knob after pressing
this button cycles the middle color of the displayed sample level
meter color through a wide variety of colors. Pressing the
Balance
knob and then the rotating it sets the division between the middle
and lower segments. Color boundaries are adjustable in one dB
increments, and have the same range as the top and bottom limits of
the meter.
BBC -13.25 dBr +13.0 dBr -24 dBFS = 0 dBr 0 dBr 8 dBr None IEC Type II
EBU -13.25 dBr +13.0 dBr -24 dBFS = 0 dBr 0 dBr 8 dBr None IEC Type II
Nordic -44 dBr +12.5 dBr -18 dBFS = 0 dBr -10 dBr 0 dBr None IEC Type I
DIN -53 dBr +5.5 dBr -15 dBFS = 0 dBr -5 dBr 0 dBr None IEC Type I
Table 6–2 Audio Scale Specification Domains and Defaults
Scale
Volume
Default Color
Bounds
Default Ballistics
Lower
Bound
Upper
Bound
Default
References
Lower Upper Float Bar
Table 6–3 Audio Change Response
Ballistic
Rise Fall
Level Change Time Level Change Time
VU Not Specified
IEC Type I
-2 dB of settled
reading
5 ms -20 dB 1.7 sec.
IEC Type II 10 ms -24 dB 2.8 sec.
None Bar or Floating Segment Not Displayed
USO
RESTRITO