Wohler AMP1-16V-MD, User Manual

Page: 89 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h no lo g i e s , I n c . A l l r i g h t s r e s e r ved .
81
C ha p t e r 6 Menu List
M a i n S c r e en H o t K e y B u t t o n C o n f ig u ra t io n M en u
If a button is configured to be off (non-functional) it will turn gray.
With the exception of the preset or off functions, pressing a button is
automatically latching/momentary as controlled by the
Options
Menu
.
Refer to Recalling Presets on page 52 (in Chapter 4) for different
methods of recalling presets.
The phase indicator between channel pairs may be turned off or on in
the
Monitor Mixer Configuration Screen
. Meters may be arranged
in clusters from the Cluster Configuration Screen . Clusters of
meters can also receive a label from that menu. The meter scale is user
defined through the
Meter Configuration Screen
. The same screen
is also used to select meter ballistics and scale and assign the meter
color scheme. The
Loudness Configuration Menu is used to turn on
and configure the phase and loudness indicators.
Main Screen Hot Key Button
Configuration Menu
Figure 6–13 Main Screen Hot Key Button
Configuration Menu
Buttons 1 - 8 – Hot Key Button Configuration : Pressing the button
highlights the button label. This highlight can be moved to different
elements by rotating the
Balance
knob.
Main Screen Hot Key Button Configuration Menu
Button 4
Pair 4
Button 2
Alt Cfg
Button 1
Pair 1
Button 7
Front
2 4 6 8 10 12 14 16
1 3 5 7 9 11 13 15
Pre
Mute
2 4 6 8 10 12 14 16
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
1 3 5 7 9 11 13 15
1 2 3 4 5 6 7 8
Solo
Solo
2 4 6 8 10 12 14 16
1 3 5 7 9 11 13 15 Solo
Off
2 4 6 8 10 12 14 16
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
1 3 5 7 9 11 13 15
Solo
Solo
Button 5
Pair 5
Button 6
Pair 6
Button 8
Button 3
Pair 3
Preset to Recall
Channels to Mute
Channels to Solo
Channels to Solo
Channels to Solo
Channels to Solo
Channels to Solo
Selectable
USO
RESTRITO