Wohler AMP1-16V-MD, User Manual

Page: 67 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h no lo g i e s , I n c . A l l r i g h t s r e s e r ved .
59
C ha p t e r 5 Efficiency Enhancements
C o p y i n g P r e s et s t o A no t h er M o n it o r
Verifying Compatibility
You can determine whether two AMP1-16 Series monitors are
compatible based on two characteristics:
• The presence/absence of a Dolby Card
• The NvRam Table Version
To verify that the two AMP1-16 Series monitors are compatible, follow
the steps below.
1. Power up the first AMP1-16 Series monitor and navigate to the Unit
Information Menu .
A. When the
Main Screen
appears, press either the button or
the button to display the
Configuration Selection
Menu
.
B. When the
Configuration Selection Menu
appears, press
the
Screen Display Menu
button to display the
Screen
Display Menu
.
C. When the
Screen Display Menu
appears, press the
Option
Menu
button to display the
Options Configuration Menu
.
D. When the
Options Configuration Menu
appears, press the
Hardware Config
button to display the
Hardware
Configuration Menu
.
E. When the
Hardware Configuration Menu
appears, press
the
Unit Info SW
button to display the
Unit Information
Menu
as shown in Figure 5–1 below.
Important:
If the two AMP1-16 Series monitors are not compatible, you should not
attempt to copy the preset file. Doing so will reset the duplicated
monitor to the factory defaults.
USO
RESTRITO