Wohler AMP1-16V-MD, User Manual

Page: 87 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h no lo g i e s , I n c . A l l r i g h t s r e s e r ved .
79
C ha p t e r 6 Menu List
M a i n S c r ee n
• Loudness Window: This control is active only when
Program
Loudness Mode is selected. Pressing this button and then rotating
the
Balance
knob adjusts the averaging time between values of 1
second and 60 seconds by one second increments.
• GPO Activate: You can use the loudness level to trigger an external
function through GPO 1. This control sets the loudness threshold at
which GPO1 is activated.
Press this button and then rotate the
Balance knob
to select the desired level. In
the Loudness Off
mode, this control doesn’t function, and GPO 1 is set to off.
• Cluster Select: Loudness may only be displayed for one cluster at a
time. Press this button and then rotate the
Balance
knob
to select
the desired cluster. In
the Loudness Off mode, this control
doesn’t function.
If a cluster already has channel contributions assigned, this control
is grayed and does not function. To use this control in this case,
press the
Clear Loudness
button first. You will then be able to
select a different cluster.
Main Screen
The
Main Screen
will appear as shown in Figure 6–12 at power up
unless the settings in the
Video Screen Configuration Menu
have
been changed.
The Dolby Pair Indicator above Pair 6 indicates the pair is a Dolby
Encoded signal. The pair will be muted so the noise of the signal
doesn’t sound in speakers or any other outputs, but the meters will be
active. You can follow the instructions in “How Do I Decode and
Monitor a Dolby Bitstream” section to monitor this particular signal
effectively, if your unit is equipped with a Dolby decoder module.
USO
RESTRITO