Wohler AMP1-16V-MD, User Manual

Page: 80 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h n o l o g i e s , In c . A l l r i g h t s r e s e r ve d .
72
Ch a p t e r 6 M en u L i st
Co n fi g u r a t i o n S e l ec t i o n M e n u
Configuration Selection Menu
Figure 6–6 Configuration Selection Menu
• Recall a Preset: To recall a preset, press the button, rotate the
Balance knob until the desired preset is shown, and then press the
Balance knob.
• SDI Source: Press the button to toggle between the two sources.
• Monitor Menu: Pressing this button calls up the Monitor Mixer
Configuration screen, which allows you to define the mix of input
pairs you hear in the speakers and other outputs.
• Screen Display Menu: Progresses to another menu screen which
contains access to other menus to configure what is displayed on the
Main Screen .
• Preset Configuration Menu: Progresses to a menu to save, name,
and manage presets.
• Analog Output Menu: Displays the Analog Output Menu where
you can set up and adjust the four analog output pairs.
• AES Output Menu: Displays the AES Output Menu where you
can set up and adjust the eight AES output pairs.
• Dolby Setup: Displays the Dolby Configuration Menu where
you can set up the Dolby decoder parameters. This button only
appears on the AMP1-E16V-MD.
Configuration Selection Menu
Monitor Menu
Preset Management Recall a Preset
8
SDI Source
Screen Display
Menu
2
Analog Output
Menu
AES Output Menu
Late Show
Dolby Menu
USO
RESTRITO