Wohler AMP1-16V-MD, User Manual

Page: 41 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h no lo g i e s , I n c . A l l r i g h t s r e s e r ved .
33
C h a p t er 2 The “How Do I...” Chapter
F re q u e nt ly A s k ed Q u es t i o ns
1. To terminate or unterminate all of the AES input pairs on the card
in this slot, press
AES Terminate All . This is an alternate-action
button.
2. To terminate or unterminate one AES input pair, press the AES 75
ohm Term button and then turn the Balance control to select the
pair that you want to terminate or unterminate. Press the
Balance
control light (terminate) or darken (unterminate) your selected
pair. This is an alternate-action button.
Figure 2–18 Hardware Configuration Menu
How do I Find Software Version Information?
Occasionally, when speaking with a customer service representative, it
is necessary to locate the software versions of the software in the
AMP1-16V-MD.
The
Unit Information Screen
:
The left screen contains the version numbers of the system software.
Hardware Configuration Menu
AES 75 ohm Term
System Reset
1 2 3 4 5 6 7 8 AES Terminate All
Unit Info
SW Upgrades
-20 dBFS = 0 dBu
Analog Reference
Level
2 hrs Screen Saver
22 22 22
Left Middle Right
Screen
Bright
Serial /
Ethernet Info
S/W Update
Application: AMP1-16-3G
Unit S/W Info
Unit Information Menu
Hardware 1RU Hardware
Application Version:
03.00
NvRam Table Ver: 00.20
Audio FPGA Ver: 01.00
Video FPGA Ver: N/A
Graphics 0 Ver: 02.00
Graphics 1 Ver: 02.00
Graphics 2 Ver: 02.00
Front Pic Ver: 00.00
Dolby Ver: 2.1.2.6
DSP Ver: 1.30
Display Type:
LCD Type A
USO
RESTRITO