Wohler AMP1-16V-MD, User Manual

Page: 31 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h no lo g i e s , I n c . A l l r i g h t s r e s e r ved .
23
C h a p t er 2 The “How Do I...” Chapter
F re q u e nt ly A s k ed Q u es t i o ns
How do I Set Up for External Surround Sound?
If a studio or other monitoring environment contains a surround sound
system, it may be advantageous to connect the monitored sound from
the AMP1-16V-MD monitor to this system. Up to four pairs (eight
channels) of AES or analog outputs are available for this use. After
connecting the needed AES or analog outputs to your surround sound
system, you will need to set up the AMP1-16V-MD to provide the
channels you need.
This is done in the AES Output Menu or Analog Output Menu as
shown:
1. Press the upper left
Output =
selector button. Then press the
Balance knob to select AES (or Analog) Output = Monitor
Channels
.
2. Press the Channel Pair button. Note that the channel pairs scroll
right and left as you turn the Balance knob so that you can select
any one of the channel pairs.
3. Press the
Affected by Solos & Mutes
button to select
Yes
so
that the output channel pair can be controlled by the
Solo
and
Mute hot keys.
4. Press the
Affected by Volume Control
button to select
Yes
so
that the output channel pair can be controlled by the Volume and
Balance
controls.
5. Repeat Steps 2 through 4 for each of the output channel pairs
needed.
Configuration Selection
Menu
Main Screen
Menu
AES Output
Menu
Configuration Selection
Menu
Main Screen
Menu
Analog Output
Menu
AES Output Menu Analog Output Menu
USO
RESTRITO