Wohler AMP1-16V-MD, User Manual

Page: 69 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h no lo g i e s , I n c . A l l r i g h t s r e s e r ved .
61
C ha p t e r 5 Efficiency Enhancements
C o p y i n g P r e s et s t o A no t h er M o n it o r
Backing Up the Saved Presets
1. Create a folder on your PC’s desktop called Presets .
2. Follow the instructions in Appendix 9 on page 113 to establish
connectivity to the AMP1-16 Series monitor.
3. Follow the instructions in Appendix 10 on page 131 to set up the
AMP1-16 Series monitor for an FTP file transfer.
4. Press the F5 key to refresh the window.
5. Drag and drop the
Presets.S19
file from the AMP1-16 Series
monitor to the Presets folder on the desktop.
6. We recommend that you rename the file so you can distinguish
multiple presets files. You must, however, maintain two parts of
the filename (both of which are case-sensitive):
• The word
Presets
(plural) must appear in the filename.
• The file’s extension must be .S19 .
7. Once the file is copied, disconnect the AMP1-16 Series monitor
from the PC.
Copying the Presets to Another Monitor
1. Connect the destination AMP1-16 Series monitor to your PC.
Note:
These instructions assume that neither of the AMP1-16
Series monitors have been configured to connect to your PC.
If they have already been configured, skip only Step
2 .
Important:
If the new filename does not meet the requirements listed in Step 6
above, the AMP1-16V-MD Series monitor will not accept the file.
Examples: Acceptable filenames:
• My Presets.S19
• 090909 Presets.S19
Unacceptable filenames:
• My Preset Set.S19
• My presets.s19
Important: This concludes this half of the preset copying procedure. Continue on
to
Copying the Presets to Another Monitor immediately below.
USO
RESTRITO