Wohler AMP1-16V-MD, User Manual

Page: 76 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h n o l o g i e s , In c . A l l r i g h t s r e s e r ve d .
68
Ch a p t e r 6 M en u L i st
A E S O ut p u t C o n fi g ur a t i o n M e n u
AES Output Configuration Menu
Figure 6–2 AES Output Configuration Menu
(Selected Sources)
Figure 6–3 AES Output Configuration Menu
(Monitor Channels)
• AES Output: This button will either be labeled
AES Output =
Selected Sources
or
AES Output = Monitor Channels
as
shown in the two figures above. Pressing this button highlights it.
Subsequent presses toggle between its two choices. If the
AES
Output = Selected Sources
is chosen, the
Balance
knob can
then be rotated to select rotated to select no source (
None
) or the
SDI or AES pair is assigned as a source. In a unit with Dolby
enabled, the five decoded output pairs are added.
• Affected by Solos & Mutes: This option is only available when the
AES output is set to monitor channels. When it is not available, it is
disabled and the options are set to
No
. When it is available, it
determines whether the
Main Screen
solo and mute buttons will
AES Output Configuration Menu
AES Output Channels 5/6 AES Output Channels 7/8
+0 +0 +0 +0
Level Trim
6 5 6 5 8 7 8 7
Affected by
Volume Control
Affected by
Solos & Mutes
Output Mute
With Headphone
AES Output =
Selected Sources
No
No
No
No
Yes
SDI In Channels 7/8 SDI In Channels 3/4
Channel Output
AES Channel Pair
AES Output Configuration Menu
AES Output Channels 5/6 AES Output Channels 7/8
+0 +0 +0 +0
Level Trim
Affected by
Volume Control
Affected by
Solos & Mutes
Output Mute
With Headphone
Channel Output
No
Yes
Yes
Yes
Yes
AES Output =
Monitor Channels
6 5 6 5 8 7 8 7
SDI In Channels 7/8 SDI In Channels 3/4
AES Channel Pair
USO
RESTRITO