8 2 1 6 9 7 :
A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h no lo g i e s , I n c . A l l r i g h t s r e s e r ved .
71
C ha p t e r 6
Menu List
An a l o g O u t p u t C o n f ig u ra t io n M en u
affect each channel pair.
Pressing this button highlights it.
Subsequent presses toggle between
Yes
and
No
for the selected
channel pair. The factory default is
No
.
•
Level Trim:
Pressing this control selects the left, the right, or both
level trim controls in the selected pair.
Selection is indicated by the
“handle” blinking light green and dark green. Rotating the
Balance
knob changes the gain. The change is indicated both
graphically and numerically.
Pressing the
Balance
control knob returns the trim(s) to unity gain.
This control has a range of -60 dB to +12 dB (inclusive) in 1 dB steps.
The channel can be muted by turning this control counterclockwise
beyond -60 dB.
•
Analog Channel Pair:
Pressing this button and then rotating the
Balance
control knob takes you through each of the four channel
pairs of the analog output port. The other controls on this menu
affect the selected pair.
•
Affected by Volume Control:
This option is only available when
the analog output is set to monitor channels. When it is not
available, it is disabled and the options are set to
No
. When it is
available, it determines whether the
Volume
control will affect each
channel pair.
Pressing this button highlights it. Subsequent presses
toggle between
Yes
and
No
for the selected channel pair.
•
Channel Output:
This adjustment is only available when the analog
output is not set to monitor channels since the AES outputs will
follow the channels selected in the
Monitor Menu
.
Pressing this button highlights the first channel select indicator.
Subsequent presses toggle between the two indicators. Rotating the
Balance
knob moves the highlight through the four indicators in
the selected channel pair. Pressing the
Balance
knob toggles the
selected indicator on or off (bright green or dark green). Doing this
will assign each channel to either, both, or neither of the analog
channel outputs.
•
Output Mute with Headphone:
Pressing this button highlights it.
Subsequent presses toggle between
Yes
and
No
for the analog
output.
USO
RESTRITO
Summary of Contents for AMP1-16V-MD
Page 42: ...USO RESTRITO...
Page 54: ...USO RESTRITO...
Page 58: ...USO RESTRITO...
Page 120: ...USO RESTRITO...
