Wohler AMP1-16V-MD, User Manual

Page: 128 / 142

Setting a Static IP in the AMP1-16V
In order to make a direct connection with units that have an
Application Version earlier than 3.10, you must FIRST set a static IP in
the unit. In order to do this, both the unit and the computer must be
connected to a LAN. This will allow you to set a static IP as shown in
the instructions which begin on Page 114. Once the unit has a static IP
(does not report an IP address of 0.0.0.0 in the Ethernet Information
Window), you can set up a direct connection with a PC as follows:
IP Address 169.254.001.001
IP Mask
255.255.0.0
Gateway 0.0.0.0
DNS
0.0.0.0
USO
RESTRITO