Wohler AMP1-16V-MD, User Manual

Page: 34 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h n o l o g i e s , In c . A l l r i g h t s r e s e r ve d .
26
Ch a p t e r 2 T he “ H o w D o I . . . ” C ha p t e r
F r e q u en t l y A sk e d Q ue s t i o n s
2. The preset naming screen will automatically appear to allow you
to name the preset. Enter a name that is descriptive and that you
will recognize later. If you have named this preset before and want
to keep the same name, simply press
to save and exit the naming
screen.
3. Next, using the other menus, set up another input channel
arrangement. Then return to the
Preset Management Menu
to
repeat the above steps.
How Do I Quickly Recall Presets from the Main
Screen?
While presets can always be recalled from the Recall Preset control
on the Configuration Selection Menu , pressing Recall Preset hot
keys on the
Main Screen
is an even more direct and quick way to do
it. This is set up in the Hot Key Configuration Menu :
1. Press the hot key that you want to be used to quickly recall a
preset. Turn the
Balance knob to highlight the type of hot key,
and then press the Balance knob repeatedly until “ Pre ” is
selected and the control turns green.
2. Turn the Balance knob again to highlight the number of the
preset you want the hot key to recall. You may also set it to
Selectable .
3. Press the Balance knob to light up your choice.
4. You can name the new hot key by turning the Balance knob to
highlight the button label itself and then pressing the Balance
knob. The hot key naming screen will then appear to allow you to
Configuration Selection
Menu
Main Screen
Menu
Screen Display
Menu
Screen Display Menu
Hot Key Menu
Main Screen Hot Key Button
Config Menu
USO
RESTRITO