53
3.
Care, cleaning and maintenance
3.6.2 Burner pot cleaning
– Lift the bottom and top part of the cone out of the burner pot – Fig. 146, 147.
– Remove all traces of sediment accumulation from the cones with a brush or scrape off with the spatula –
Fig. 148, 149.
Fig. 146 Lift out top part of cone
Fig. 147 Lift out bottom part of cone
Fig. 148 Clean cone
Fig. 149 Clean cone
– Vacuum out the burner pot (Fig. 150), remove the primary air pin and carefully clean the holes with a small
screwdriver or drill bit if necessary (holes must be clear) – Fig 151, 152.
– All secondary air holes in the burner pot must be kept clear – Fig. 153.
Fig. 150 Vacuum out the burner pot
Fig. 151 Take out the primary air pin
Fig. 152 Clean the primary air pin carefully
Fig. 153 Clean the secondary air holes in
the burner pot carefully
Information!
When cleaning the boiler, always first remove all the ash from the combustion chamber. Do not
remove the primary air pin for cleaning until afterwards.
