14
2.
Operation
2.5 InfoWINplus
The InfoWINplus is a central operating and display unit for boilers and for modules of the MESplus system control
(see separate instructions).
It consists of a large full text display, an ON/OFF button with an LED signal lamp indicating Operation (green) or
Malfunction (red), a button for manual operation / flue cleaning function as well as four individual menu buttons.
The function of each menu button is displayed on the Menu line.
Backlit display
Colours of backlit display:
– White: Normal operation
– Pink:
Information and fault messages
– Red:
Alarm message
During normal operations the backlit display is switched off automatically after 10 minutes if no button is pressed
during this period.
Display
If the boiler is in standby mode or solid fuel/buffer mode for longer than one hour, the display is switched off
completely and only the green LED is lit. The display is switched on again when a button is pressed or if another
operating mode is activated.
The various operating modes are displayed on InfoWINplus together with the corresponding operating phases.
The following
operating modes
exist:
– OFF
– ON (with self-test, lighting ON, lighting OFF)
– Pellet feed
– Solid fuel / buffer mode
– Manual operation
– Chimney sweeper function
– Shut-down procedure
Corresponding
operating phases
:
– Standby, display OFF
– Purging
– Ignition phase
– Flame stabilisation
– Modulation mode
– Burnout
– Burner OFF
– Switch off heat generator
è
Fig. 11 InfoWINplus
Boiler temperature
(Operating phases)
Info
Menu
38
°C
Operating phases are
displayed here, inclu-
ding Standby, Burner
OFF, etc.
Menu line
Signal lamp (LED)
“Operation” green
Full-text display
(illuminated display)
Assignment of buttons
to their specific function
Manual operation and
Chimney sweeper
function
ON/OFF button
Menu buttons
