43
2.
Operation
2.9.2 Service level
System parameters, start-up and the actuator test can
be displayed, performed and/or modified in the service
level.
Information!
Changes on the Service level may be per-
formed only by trained service personnel
(directions for setting, see the BioWIN 2 as-
sembly instructions)
The menu item or sub-menu item is exited by pressing
the
Back
button (Fig. 117) or after a delay of 10 minutes.
1
only displayed when an MESplus control is present and this has been adjusted by a trained service technician in the basic settings.
Operator level
Service level
Information level
MES Module
1
Choose
Back
Service level only for trained
service personnel
5sec
Parameters
Start-up
Actuator test
Settings
Choose
Back
Fig. 115
Fig. 116
Fig. 117