51
3.
Care, cleaning and maintenance
Information!
When reinstalling the ash container and cover, check they are in the correct position and are sealed
– danger of inleaked air!
Attention!
The boiler must not be operated without the ash box!
Assembly:
– Refit container by working through these steps in reverse order.
Important:
Slide ash container handle all the way back in.
Note!
The size of the box is related to the max. ash content of the pellets. If the ash box is not full when a
cleaning request is issued, then ash content will be less.
Fig. 135 Pulling out handle
Fig. 136 Opening the bracket fastener
Fig. 137 Moving container slightly to the left
Fig. 138 Taking out container
Fig. 139 Open the side bracket fasteners,
remove cover
– Slide container slightly to the left and pull out – Fig. 137, 138.
– Release the side bracket fasteners, remove cover and empty the ash box – Fig. 139, 140.
Fig. 140 Empty the ash box