36
2.
Operation
“with start time”
A time can be set here in the “Time profile feed” menu
item for filling the reserve supply container if the “with
start time” setting is active in the “Feed operating
mode” menu item (see section 2.9.1.4). The reserve
supply container is filled every day at the set time. Inte-
rim fills are also performed if the filling amount is not
sufficient for 24 hours.
Factory setting “Feed start time”: Start 20:00
Pressing the
–
or
+
buttons changes the time in 1 min
steps – Fig. 92.
Feed start time
Start
20:00
–
Save
Back
+
Fig. 94
Pressing the
Save
button saves the changed time –
Fig. 93.
The menu item or sub-menu item is exited by pressing
the
Back
button (Fig. 95) or after a delay of 10 minutes.
“without time control” or “switched off”
No setting is possible here in the “Time profile feed”
menu item if the “without time control” or “switched
off” setting is active in the “Feed operating mode” menu
item (see section 2.9.1.4) – Fig. 96.
The menu item or sub-menu item is exited by pressing
the
Back
button (Fig. 96) or after a delay of 10 minutes.
Fig. 92
Feed start time
Start
20:30
–
Save
Back
+
Confirm stage 1 cleaning
Confirm stage 2 cleaning
Pellet consumption
Time
Feed operating mode
Time profile feed
Choose
Back
Feed without time control or
switched off
Back
The display shows “Parameter is saved” for a few se-
conds (Fig. 94) and then changes back to the previous
level – Fig. 95.
Fig. 93
Parameter is saved
(Animated symbol)
Fig. 95
Fig. 96
