59
3.
Care, cleaning and maintenance
3.11 Pellet storage room or storage container
(BioWIN 2 Premium and Exklusiv)
Attention!
Please also note the hazard information in section 1.3.3 Entering the pellet storage room, storage
container.
Information!
When entering the pellet storage room or storage container do not stand on the pellets around the suc-
tion probe.
Before filling the pellet storage room or storage container, check the following:
– whether the storage room is free of foreign bodies.
– whether a lot of dust has settled on the floor over time.
Please note: A layer of dust on top of the pellets is normal because dust present migrates to the surface when
the pellets gush out during removal.
– whether pellets have swelled up against the wall if the storage room is not fully dry.
Tip!
Pellet dust is totally organic and can therefore be disposed of as organic waste.
Leading pellet suppliers recommend fully emptying the storage room every 2–3 years. You can
deactivate automatic changeover between the three suction probes using the InfoWINplus (see
section 2.9.1.4). This allows you to fully empty the storage room for one probe. You can then con-
tinue heating with the other suction probes. If you repeat this process each year with different
probes , you will be “renewing“ your entire storage of pellets regularly.
3.12 Full service
In addition to cleaning your pellet boiler, maintenance is also required. This is also shown in the display as “Main-
tenance“ (Fig. 176) and is carried out by the Windhager customer services or customer services partner. It is a
prerequisite for the warranty conditions. Maintenance must be carried out by the date on the inspection plate at
the latest – Fig. 177.
Fig. 176
Prüfplakette
WARTUNG
Kundennummer / Kesseltype
Prüfer
Prüfdatum
für Prüfjahr
2017
Prüfturnus
1 Jahr
2 Jahre
Nächste
Prüfung
2014
20
1
5
2
0
16
2
01
8
2
0
19
20
20
024140-00
Fig. 177 Inspection plate for maintenance
Full service
IN 524
(Operating phases)
Info
Reset
Menu
42
°C
