Wincor Nixdorf TH180, Programmer'S Manual

Page: 147 / 162

TH180 Programmer’s Guide
142
<Function 67> GS ( L pL pH m fn a kc1 kc2 b xL xH yL yH
[
c d1…dk
]
1…
[
c
d1…dk
]
b
[Format] 1DH, 28H, 4CH, pL, pH, m, fn, a, k c1, k c2, b, xL, xH , yL, yH, [ c d1…dk ]1…[ c d1…dk ]b
[Valid limits] (1) GS ( L parameter
3 (pL+pH×256) 65535 (0 pL 255, 0 pH 255)
(2) GS 8 L parameter
3 (p1+pp4x16777216) 4294967295
(0 p1 255, 0 p2 255,0 p3 255, 0 p4 255)
(3) GS ( L /GS 8 L common parameter
m=48
fn=67
a=48
32 kc1 126
32 kc2 126
b=1,2
1 (xL+xH×256) 8192
1 (yL+yH×256) 2304
c=49 (single-color paper designation)
c=49, 50 (two-color paper designation)
0 d 255
k=(int((xL+xH×256)+7)/8)×(yL+yH×256)
It is possible to designate the total definition area from one of the[384K, 448K, 512K, 576K]byte from GS (E. The
initial value is 384 K bytes.
[Function] (1) The raster format defines the graphics data to the non-volatile memory.
b designates the color number of the defined data.
xL, xH designates the horizontal direction of the defined data as (xL+xHx256) dot.
yL, yH designates the vertical direction of the defined data as (yL+yHx256) dot.
c designates the color of the defined data.
c Defined data color
49 First color
50 Second color
The first color indicates the black color (high energy) of designated double-color thermal paper.
The second color indicates the red color (low energy) of designated double-color thermalpaper.
(2) If a number of colors are designated by b, or the same color is selected by c, the command
process stops, validates the defined data up to that point and skips the remaining data.
(3) If this command is processed in the state defined by NV bit image of FS q, it defines the data
according to this function after clearing all of the NV bit images.