Wincor Nixdorf TH180, Programmer'S Manual

Page: 155 / 162

TH180 Programmer’s Guide
150
<Function 169> GS ( k pL pH cn fn n
[Designation] Setting of Error level(QR code)
[Format] 1DH, 28H, 6BH, pL, pH, cn, fn, n
[Valid limits] pL=3, pH=0
cn=49
fn=69
48 n 51
[Initial value] n = 48
[Function] (1) set the error correction level of the symbol.
n function Ability for reconstruction
48 Error Correction Level L 7
49 Error Correction Level M 15
50 Error Correction Level Q 25
51 Error Correction Level H 30
(2) This becomes the initial value by an initialization command (ESC @).
(3) At the time of the microQR cord, it cannot select error correction level H.
<Function 180> GS ( k pL pH cn, fn, m, d1
………
dk
[Designation] Save the symbol data (QR code)
[Format] 1DH, 28H, 6BH, pL, pH, cn, fn, m, d1………dk
[Valid limits] 4 (pL+pH×256) 7092 0 pL 255, 0 pH 28
cn=49
fn=80
m=48,
0 d 255
k=(pL+pH×256)-3
[Initial value] --
[Function] (1) Save the symbol data.
(2) This becomes the initial value by an initialization command (ESC @).