Wincor Nixdorf TH180, Programmer'S Manual

Page: 63 / 162

TH180 Programmer’s Guide
58
(10) If the specified print area width is less than the amount for one character of
the character width currently specified, the processing given below is
executed for that line. This applies when character data is expanded.
a. The print area is enlarged to the right up to an amount equivalent to one
character of the specified character type. The print area is enlarged in the
range where the print area width is not exceeded.
b. If the processing operation in a. above cannot allocate area equivalent to
one character, the print area is enlarged to the left.
(The left margin is reduced.)
(11) If the specified print area width is less than nine dots, the processing given
below is executed for that line. This applies when non-character data (bit
images, user-defined bit images, and bar codes) is expanded.
a. The print area is enlarged up to nine dots in the range where the print
area width is not exceeded.
b. If the processing operation in a. above cannot allocate area up to nine
dots, the print area is enlarged to the left. (The left margin is
reduced.)